COOKTOP NOT
WORKING? FIX IT TODAY.

We repair cooktops from most major appliance manufacturers, including GE, Whirlpool, KitchenAid, Samsung, LG, Bosch, Frigidaire, Electrolux, JennAir, Viking, Thermador, Wolf, Monogram, Maytag and many other brands. Our technicians service gas, electric and induction cooktops, including many built-in models.

Whether your cooktop won't heat, a burner isn't working, the igniter keeps clicking or the appliance is displaying an error code, we use manufacturer-recommended diagnostic procedures to accurately identify the problem before recommending a repair.

If you don't see your cooktop brand listed, simply contact us with the manufacturer and model number. We'll be happy to confirm whether we can service your appliance.

Yes. Same-day cooktop repair is available whenever scheduling permits. We understand how important a properly functioning cooktop is for everyday meal preparation and work to provide the earliest available appointment whenever possible.

If one or more burners are not heating, your gas burner won't ignite, the induction cooktop isn't recognizing cookware or you're experiencing another problem, let us know when scheduling your appointment. This allows our technician to prepare with commonly used replacement parts and diagnostic equipment.

Many cooktop repairs can be completed during the initial visit. If a manufacturer-specific component is required, we'll explain the repair timeline before any work begins.

The cost of cooktop repair depends on the appliance type, brand, failed component and the complexity of the repair. Since similar symptoms can have different underlying causes, an accurate estimate requires a professional diagnosis.

For example, a burner that won't heat may require a new heating element, surface element switch, ignition component, control board, induction module or another part depending on the cooktop design. Each repair involves different parts and labor.

After diagnosing the problem, your technician will explain the cause of the malfunction and provide a clear repair estimate before any work is performed.

Whether it's better to repair or replace your cooktop depends on its age, overall condition, repair cost and the specific component that has failed. Many common issues, such as faulty burners, ignition switches, heating elements or control components, can often be repaired for much less than the cost of replacing the entire appliance.

If the cooktop has extensive structural damage, multiple major failures or replacement parts are no longer available, installing a new appliance may be the more practical long-term solution. A professional inspection can help determine which option makes the most financial sense.

After diagnosing the problem, our technician will explain the condition of your cooktop, review the repair options and provide an honest recommendation before any work begins.

If your gas cooktop won't ignite, the problem may be caused by a faulty spark igniter, ignition switch, clogged burner ports, damaged wiring or another component within the ignition system. In some cases, moisture or food debris around the burner can also interfere with proper ignition.

Some burners may click continuously without lighting, while others produce no spark at all. Because several parts work together during the ignition process, professional diagnosis is the most reliable way to identify the exact cause.

Our technicians can inspect the ignition system, locate the failed component and restore safe, dependable operation to your gas cooktop.

A gas burner that continues clicking after ignition usually indicates that the ignition system is not detecting a proper flame or that moisture, food residue or a faulty ignition component is interfering with normal operation. Continuous clicking can affect one burner or the entire cooktop depending on the appliance design.

Although cleaning the burner area may occasionally resolve the issue, persistent clicking often points to a worn spark module, ignition switch or another electrical component that requires service.

If your cooktop continues clicking even after the burner has ignited, our technicians can diagnose the ignition system and recommend the appropriate repair.

If your gas burner clicks but fails to light, or doesn't ignite at all, the problem may be caused by clogged burner ports, a faulty igniter, insufficient gas flow, a defective ignition switch or another component within the ignition system. Even small amounts of grease or food residue can interfere with proper burner operation.

Some burners may ignite intermittently, while others stop working completely. Since several components must function correctly for reliable ignition, professional diagnosis is the best way to determine the exact cause of the problem.

Our technicians can inspect the burner assembly, test the ignition system and restore safe, reliable operation to your gas cooktop.

A weak, uneven or irregular gas flame is often caused by clogged burner ports, improper burner cap placement, restricted gas flow or a problem with the burner assembly. A properly functioning burner should produce a steady, evenly distributed blue flame.

Uneven flames can reduce cooking performance and make it difficult to heat cookware consistently. If cleaning the burner does not restore normal operation, there may be an issue with one of the cooktop's gas or ignition components.

Our technicians can identify the source of the problem, restore proper flame performance and ensure your gas cooktop operates safely and efficiently.

If your electric cooktop isn't heating, the problem may involve a failed surface element, infinite switch, heating element, wiring, electronic control board or another electrical component. Depending on the model, one burner or the entire cooktop may be affected.

Some cooktops stop heating completely, while others only produce low heat or heat intermittently. Since several electrical components work together to regulate burner operation, accurate diagnosis is necessary before replacing any parts.

Our technicians can test the heating system, identify the failed component and recommend the appropriate repair to restore normal cooking performance.

If only one burner on your cooktop has stopped working, the problem is usually isolated to that burner's heating or ignition system. Depending on the appliance type, the failure may involve a surface element, burner switch, igniter, wiring, induction module or another component dedicated to that cooking zone.

While the remaining burners may continue to operate normally, a single non-functioning burner can make everyday cooking inconvenient. Because several components can produce the same symptoms, professional testing is the most reliable way to identify the exact cause.

Our technicians can diagnose the affected burner, replace the faulty component if necessary and restore your cooktop to proper working condition.

If your cookware heats unevenly or food cooks inconsistently, your cooktop may not be distributing heat properly. Possible causes include a worn heating element, faulty burner control, damaged induction module or another component affecting heat output.

Uneven heating can make cooking difficult and may become more noticeable when using larger pots and pans. In some cases, the burner reaches temperature slowly or cycles incorrectly, resulting in inconsistent cooking performance.

Our technicians can test the heating system, identify the source of the problem and restore consistent heat distribution across your cooktop.

Induction cooktops require compatible magnetic cookware to operate correctly. If the appliance does not recognize a pan, the issue may be caused by incompatible cookware, improper pan placement, a faulty induction sensor, damaged induction module or an electronic control problem.

If cookware that previously worked is no longer being detected, the cooktop itself may require service. Because induction appliances rely on advanced electronic components, professional diagnosis is often necessary to determine the exact cause.

Our technicians can inspect your induction cooktop, verify proper operation and identify whether the problem is related to the cookware or the appliance itself.

If your cooktop controls stop responding or certain buttons no longer work, the problem may involve the touch panel, control board, selector switches, wiring or the appliance's power supply. Depending on the model, the issue may affect a single burner or the entire cooktop.

Electronic controls can fail because of normal wear, moisture, power surges or internal electrical faults. Since multiple components communicate with the control system, proper testing is required to identify the exact source of the malfunction.

Our technicians can inspect the control system, diagnose the failed component and restore normal operation to your cooktop.

Modern cooktops monitor burner operation, temperature sensors, electronic controls and other internal systems. When the appliance detects an abnormal condition, it may display an error code to indicate that one of these systems requires attention.

Although the code provides a helpful starting point, it does not always identify the exact failed component. The same error may be caused by a faulty sensor, damaged wiring, induction module, control board or another related part depending on the manufacturer and model.

Our technicians use manufacturer diagnostic procedures together with the displayed error code to accurately determine the cause of the problem before recommending a repair.

If your cooktop repeatedly trips the circuit breaker, there may be an electrical fault that requires prompt attention. Possible causes include a shorted heating element, damaged wiring, faulty induction module, defective control board or another component drawing excessive current.

Continuously resetting the breaker without identifying the cause can lead to additional electrical damage and may create a safety hazard. In some situations, the problem may also be related to the home's electrical circuit rather than the appliance itself.

Our technicians can inspect the cooktop's electrical system, determine why the breaker keeps tripping and recommend the appropriate repair to restore safe, reliable operation.

Some sounds are normal during cooktop operation, especially with induction models, but loud buzzing, humming, clicking or vibrating noises may indicate a problem. Depending on the appliance type, the source could be the induction module, cooling fan, ignition system, electronic controls or another internal component.

If the noise has recently become louder, occurs when it didn't before or is accompanied by heating problems or error codes, the appliance should be inspected. Continuing to use a malfunctioning cooktop may place additional stress on internal components.

Our technicians can determine whether the noise is part of normal operation or a sign of a developing mechanical or electrical issue and recommend the appropriate repair.

In most cases, a cracked glass cooktop cannot be repaired by sealing or filling the damaged surface. The proper solution is typically to replace the glass cooktop assembly, provided the replacement part is available for your model.

Even a small crack can expand over time due to repeated heating and cooling cycles. Depending on the location and severity of the damage, the crack may also affect the appliance's safety and performance.

Our technicians can inspect the cooktop, evaluate the extent of the damage and determine whether replacing the glass surface is the most practical repair option.

Glass cooktops may crack for several reasons, including impact from heavy cookware, sudden temperature changes, manufacturing defects or stress caused by improper installation. In some cases, damage develops gradually before becoming visible on the surface.

Although ceramic glass is designed to withstand high temperatures, it is not immune to physical impact or thermal stress. Once cracked, the glass may continue to weaken with normal use.

Our technicians can examine the cooktop, assess whether additional components have been affected and recommend the safest repair or replacement solution.

No. If your glass cooktop is cracked, it's generally recommended to stop using it until the appliance has been inspected. Cracks can expand with continued heating and may allow moisture to reach electrical components beneath the glass surface, creating potential safety risks.

Even if the burner still appears to operate normally, the damaged surface may become less stable over time. Continuing to cook on a cracked cooktop can increase the likelihood of additional damage and more costly repairs.

Our technicians can evaluate the condition of the cooktop, determine whether the glass assembly requires replacement and recommend the safest solution.

Yes. We repair gas, electric and induction cooktops from many leading appliance manufacturers. Each type of cooktop uses different heating technologies and control systems, and our technicians are trained to diagnose and repair all three.

Whether you're dealing with ignition problems, burners that won't heat, induction zones that don't recognize cookware, electrical faults or control panel issues, we use manufacturer-recommended diagnostic procedures to accurately identify the cause.

If you're unsure which type of cooktop you have, simply provide the brand and model number when scheduling service and we'll identify the appliance before your appointment.

Yes. We repair many types of built-in cooktops, including gas, electric and induction models installed directly into kitchen countertops. Our technicians service both standard residential cooktops and many premium built-in appliances.

Built-in cooktops often require specialized access and careful removal before repairs can be performed. We follow manufacturer-recommended procedures to safely diagnose the appliance while protecting the surrounding countertop and cabinetry.

If your built-in cooktop has heating problems, ignition issues, damaged controls or displays an error code, our technicians can identify the cause and recommend the appropriate repair.

Before your appointment, clear the area around the cooktop so the technician has safe access to the appliance. Remove cookware, utensils and any items stored nearby that could interfere with the inspection or repair.

If available, have the cooktop's model number ready and be prepared to describe the symptoms you've noticed, such as burners not heating, continuous clicking, error codes, unusual noises or intermittent operation. This information can help speed up the diagnostic process.

After inspecting the appliance, the technician will explain the cause of the problem, answer your questions and provide a repair recommendation before any work begins.

Whenever possible, we install OEM (Original Equipment Manufacturer) replacement parts that are designed specifically for your cooktop model. Using correctly matched components helps ensure proper fit, dependable performance and long-term reliability.

If an original manufacturer part has been discontinued or is unavailable, we may recommend a high-quality compatible replacement that meets the appliance's technical requirements. We'll always explain the available options before completing the repair.

Our goal is to restore your cooktop using reliable replacement parts that help maintain safe and consistent operation.

Our experienced technicians repair gas, electric and induction cooktops from many leading appliance brands using professional diagnostic procedures and quality replacement parts. We focus on finding the root cause of the problem rather than replacing parts based solely on symptoms.

Whether you're dealing with ignition failures, burners that won't heat, cracked glass, control panel problems or error codes, we provide clear explanations, transparent repair recommendations and upfront estimates before any work is performed.

We're committed to delivering dependable cooktop repairs that help restore safe, efficient cooking and reliable day-to-day performance.

Yes. Qualifying cooktop repairs include limited warranty coverage on the work performed. Warranty terms depend on the type of repair completed and the replacement parts installed during the service.

If the same covered issue occurs during the warranty period, we'll inspect the appliance and address any qualifying problem in accordance with the warranty terms. Warranty coverage applies to the original repaired issue rather than unrelated failures that may occur later.

Before completing the repair, your technician will explain the warranty coverage that applies to your specific cooktop service and answer any questions you may have.

Many common cooktop problems can be diagnosed and repaired during the first service visit, especially when the required replacement parts are readily available. The total repair time depends on the appliance type, accessibility and the complexity of the failure.

Repairs involving specialty electronic components, induction modules or manufacturer-specific parts may require a follow-up appointment once the necessary parts arrive. We'll keep you informed throughout the repair process and explain the expected timeline.

After the repair is completed, the cooktop is thoroughly tested to verify proper burner operation, heating performance and safe functionality before the service is finished.

Yes. We frequently repair older gas, electric and induction cooktops from many major manufacturers, provided suitable replacement parts remain available. Many older appliances continue to perform reliably after professional repairs.

During the diagnostic inspection, we'll evaluate the overall condition of your cooktop, determine whether the required components can still be obtained and explain whether repairing the appliance is a practical option.

If replacement parts are no longer available or the repair is not economically worthwhile, we'll discuss your options so you can make an informed decision before any work is performed.